Compatible Camera Brand

Reolink Cameras + SmartCam Alerts

Turn your Reolink IP camera into an AI-powered alert system. Connect via RTSP in minutes and start receiving intelligent notifications.

Download SmartCam Bridge

Reolink RTSP URL Format

Use the following RTSP URL format to connect your Reolink camera to SmartCam Alerts.

# Main stream (high quality)
rtsp://username:password@IP:554/h264Preview_01_main
# Sub stream (lower bandwidth)
rtsp://username:password@IP:554/h264Preview_01_sub

Replace username and password with your Reolink camera credentials, and IP with the camera's local IP address. The "01" in the URL refers to channel 1. For NVR systems, change this number to match the camera channel. Note: RTSP must be enabled in Reolink's settings (it is on by default for most models).

Setup in 3 Steps

Get AI-powered alerts from your Reolink camera in under five minutes.

1

Download the Bridge

Install the SmartCam Bridge on any computer connected to the same network as your Reolink camera. Available for Windows, macOS, and Linux.

2

Enter Your RTSP URL

Paste your Reolink RTSP URL into the Bridge app. Use the format shown above with your camera's IP address and login credentials.

3

Set Alert Rules

Define what you want to be alerted about in plain English. For example: "dog in the backyard" or "delivery truck in the driveway."

Compatible Reolink Models

SmartCam Alerts works with any Reolink camera that supports RTSP streaming. Here are some popular models.

RLC-810A

4K PoE Bullet Camera

RLC-820A

4K PoE Dome Camera

RLC-510A

5MP PoE Bullet Camera

RLC-520A

5MP PoE Dome Camera

RLC-823A

4K PTZ PoE Camera

E1 Zoom

5MP WiFi PTZ Camera

RLN8-410

8-Channel PoE NVR

Argus 3 Pro

Battery WiFi Camera

Frequently Asked Questions

Common questions about using Reolink cameras with SmartCam Alerts.

How do I find my Reolink camera's IP address?
Open the Reolink app or Reolink Client on your computer, select your camera, and go to Device Settings > Network > Network Information. The camera's IP address will be displayed there. You can also check your router's connected devices list.
What are the default credentials for Reolink cameras?
The default username for Reolink cameras is "admin". The default password is blank (empty) unless you set one during initial setup. Newer Reolink firmware versions require you to create a password during first-time configuration.
Do I need to enable RTSP on my Reolink camera?
RTSP is enabled by default on most Reolink PoE and WiFi cameras. To verify, go to Device Settings > Network > Advanced > Port Settings in the Reolink app or client, and confirm the RTSP port (default 554) is enabled. Some newer battery-powered models may not support RTSP -- check your model's specifications.
Does this work with Reolink battery cameras like the Argus series?
Battery-powered Reolink cameras have limited RTSP support. Models like the Argus 3 Pro support RTSP when connected to WiFi, but the stream may not be continuous since these cameras use motion-activated recording to preserve battery life. For best results with SmartCam Alerts, use a wired PoE or WiFi-powered Reolink camera.
Does SmartCam work with Reolink NVR systems?
Yes. For cameras connected through a Reolink NVR, you can connect to each camera channel individually. Change the channel number in the RTSP URL (e.g., h264Preview_02_main for channel 2). You can connect to the NVR's IP address directly.
Can I connect multiple Reolink cameras?
Yes. The free tier supports one camera. The Pro plan supports up to 5 cameras, and the Business plan supports unlimited cameras. Each camera needs its own RTSP URL entered in the SmartCam Bridge.

Ready to Make Your Reolink Camera Smarter?

Download the SmartCam Bridge and start getting AI-powered alerts from your Reolink camera in under five minutes. Free tier available -- no credit card required.

Download SmartCam Bridge

Recommended Reolink Cameras

As an Amazon Associate SmartCam Alerts earns from qualifying purchases. Links below help support our work at no cost to you.

Reolink offers strong value across budget and pro tiers. Top picks for SmartCam-compatible models: