Compatible Camera Brand

Foscam Cameras + SmartCam Alerts

Turn your Foscam IP camera into an AI-powered alert system. Connect via RTSP in minutes and start receiving intelligent notifications.

Download SmartCam Bridge

Foscam RTSP URL Format

Use the following RTSP URL format to connect your Foscam camera to SmartCam Alerts.

# Main stream (high quality)

rtsp://username:password@IP:88/videoMain

# Sub stream (lower bandwidth)

rtsp://username:password@IP:88/videoSub

Replace username and password with your Foscam credentials, and IP with the camera’s local IP address. Foscam uses port 88 by default for RTSP (not 554), though this can be changed in the camera’s web interface. Use videoMain for the high-quality stream or videoSub for a lower-bandwidth substream.

Setup in 3 Steps

Get AI-powered alerts from your Foscam camera in under five minutes.

Download the Bridge

Install the SmartCam Bridge on any computer connected to the same network as your Foscam camera. Available for Windows, macOS, and Linux.

Enter Your RTSP URL

Paste your Foscam RTSP URL into the Bridge app. Use the format shown above with your camera's IP address and login credentials.

Set Alert Rules

Define what you want to be alerted about in plain English. For example: "dog in the backyard" or "delivery truck in the driveway."

Compatible Foscam Models

SmartCam Alerts works with any Foscam camera that supports RTSP streaming. Here are some popular models.

R4M

4MP Indoor PTZ

V8EP

4K PoE Bullet

SD4

4MP Outdoor PTZ

G4P

4MP PoE Dome

B5

5MP WiFi Bullet

VZ4

4MP Outdoor WiFi

X5

5MP Pan-Tilt Cam

R2C

1080p Indoor Cam

Frequently Asked Questions

Common questions about using Foscam cameras with SmartCam Alerts.

How do I find my Foscam camera’s IP address?

Open the Foscam app or visit the camera’s web interface via the Foscam Search Tool (downloaded from foscam.com/downloads). Once logged in, navigate to Settings > Network > IP Configuration to view the camera’s IP address. You can also check your router’s DHCP client list.

What are the default credentials for Foscam cameras?

On older Foscam firmware, the default username and password were both "admin". Newer Foscam cameras require you to create a custom username and password during initial setup — there is no factory default. If you forget your credentials, reset the camera using the physical reset button.

Do I need to enable RTSP on my Foscam camera?

RTSP is enabled by default on most modern Foscam cameras. To verify, log into the camera’s web interface and check Settings > Network > Port. The RTSP port should be set to 88 (or another port you choose). Some older or budget Foscam models may not support RTSP at all — check your model’s specifications.

Why is the Foscam RTSP port 88 and not 554?

Foscam historically used port 88 as the default for both web interface and RTSP, while most other manufacturers use 554. You can change this in the camera’s web settings under Network > Port if you prefer. Your RTSP URL will need to match whatever port you select.

Can I use this with Foscam cloud-only cameras?

No. Some entry-level Foscam cameras are cloud-only and do not expose RTSP streams. Look for Foscam models advertised as supporting RTSP, ONVIF, or NVR compatibility — these are the ones SmartCam Alerts can use.

Can I connect multiple Foscam cameras?

Yes. The free tier supports one camera, Pro supports up to 5 cameras, and Business supports unlimited cameras. Each camera needs its own RTSP URL entered in the SmartCam Bridge.

Ready to Make Your Foscam Camera Smarter?

Download the SmartCam Bridge and start getting AI-powered alerts from your Foscam camera in under five minutes. Free tier available -- no credit card required.

Download SmartCam Bridge