Compatible Camera Brand

Amcrest Cameras + SmartCam Alerts

Turn your Amcrest IP camera into an AI-powered alert system. Connect via RTSP in minutes and start receiving intelligent notifications.

Download SmartCam Bridge

Amcrest RTSP URL Format

Use the following RTSP URL format to connect your Amcrest camera to SmartCam Alerts.

# Main stream (high quality)

rtsp://username:password@IP:554/cam/realmonitor?channel=1&subtype=0

# Sub stream (lower bandwidth)

rtsp://username:password@IP:554/cam/realmonitor?channel=1&subtype=1

Replace username and password with your Amcrest camera credentials, and IP with the camera's local IP address. The default port is 554. Use subtype=1 for a lower-resolution stream that uses less bandwidth.

Setup in 3 Steps

Get AI-powered alerts from your Amcrest camera in under five minutes.

Download the Bridge

Install the SmartCam Bridge on any computer connected to the same network as your Amcrest camera. Available for Windows, macOS, and Linux.

Enter Your RTSP URL

Paste your Amcrest RTSP URL into the Bridge app. Use the format shown above with your camera's IP address and login credentials.

Set Alert Rules

Define what you want to be alerted about in plain English. For example: "person at the front door" or "car parked in the driveway."

Compatible Amcrest Models

SmartCam Alerts works with any Amcrest camera that supports RTSP streaming. Here are some popular models.

IP8M-T2669EW

4K UHD Turret PoE Camera

IP5M-T1179EW

5MP Turret PoE Camera

IP4M-1051W

4MP ProHD WiFi Camera

IP8M-2693EB

4K Bullet PoE Camera

IP2M-841B

1080P ProHD Dome Camera

ASH26-W

SmartHome 1080p Pan/Tilt Camera

IP5M-B1186EW

5MP Bullet PoE Camera

IP4M-1041B

4MP Indoor WiFi Camera

Frequently Asked Questions

Common questions about using Amcrest cameras with SmartCam Alerts.

How do I find my Amcrest camera's IP address?

You can find your Amcrest camera's IP address using the Amcrest IP Config Tool (available from amcrest.com/downloads), or by checking your router's connected devices list. You can also access the camera via the Amcrest Smart Home app and view the network settings.

What are the default login credentials for Amcrest cameras?

The default username for Amcrest cameras is "admin". The password is whatever you set during initial setup. If you have not changed it, try your original setup password. Amcrest cameras require you to set a password during first-time setup, so there is no universal default password.

Should I use the main stream or sub stream?

For SmartCam Alerts, the sub stream (subtype=1) is usually sufficient and uses less bandwidth. The AI analysis works well with lower resolutions. Use the main stream (subtype=0) if you need higher-quality alert snapshots or have plenty of available bandwidth.

Do I need to enable RTSP on my Amcrest camera?

RTSP is enabled by default on most Amcrest IP cameras. If you are having trouble connecting, log into the camera's web interface, go to Setup > Network > TCP/IP, and verify that the RTSP port (default 554) is active. You may also want to check that the camera firmware is up to date.

Does this work with Amcrest Cloud?

SmartCam Alerts connects directly to your camera over your local network via RTSP. It does not require or interact with Amcrest Cloud. Your camera stream stays on your network -- SmartCam Bridge captures frames locally and sends only snapshots to the AI for analysis.

Can I connect multiple Amcrest cameras?

Yes. The free tier supports one camera. The Pro plan supports up to 5 cameras, and the Business plan supports unlimited cameras. Each camera needs its own RTSP URL entered in the SmartCam Bridge.

Ready to Make Your Amcrest Camera Smarter?

Download the SmartCam Bridge and start getting AI-powered alerts from your Amcrest camera in under five minutes. Free tier available -- no credit card required.

Download SmartCam Bridge